CADopia - Extruding Solid Faces - CADopia, January 22, 2007

CADopia - Slicing Solids - CADopia, January 18, 2007

CADopia - Sectioning Solids - CADopia, January 18, 2007

CADopia - Aligning in Three Dimensions - aligning an entity with another, CADopia, January 15, 2007

CADopia - Chamfering and Filleting Solids - CADopia, January 15, 2007

CADopia - Mirroring in Three Dimensions - mirroring an entity about a 3D plane, CADopia, January 11, 2007

CADopia - Arraying in Three Dimensions - creating 3D rectangular and polar array, CADopia, January 11, 2007

CADopia - Rotating in Three Dimensions - rotating an entity about an axis in three dimensions, CADopia, January 8, 2007

CADopia - Creating Composite Solids - combining, subtracting and intersecting solids, CADopia, January 8, 2007

CADopia - Creating Revolved Solids - CADopia, January 4, 2007

CADopia - Creating Extruded Solids - CADopia, January 4, 2007

CADopia - Creating Domes - creating a dome as a 3D surface, CADopia, December 28, 2006

CADopia - Creating Tori - creating a torus as a 3D surface, CADopia, January 1, 2007

CADopia - Creating Regions - CADopia, January 1, 2007

CADopia - Creating Cylinders - creating a cylinder as a 3D surface, CADopia, December 25, 2006

CADopia - Creating Spheres - creating a sphere as a 3D surface, CADopia, December 25, 2006

CADopia - Creating Dishes - creating a dish as a 3D surface, CADopia, December 28, 2006

CADopia - Creating Pyramids - creating a tetrahedron, a pyramid with a planar top and as a three-dimensional surface, CADopia, December 21, 2006

CADopia - Creating Cones - creating a cone as a three-dimensional surface, CADopia, December 21, 2006

CADopia - Creating wedges - CADopia, December 18, 2006

CADopia - Creating boxes - CADopia, December 18, 2006

CADopia - Creating Revolved Surfaces - CADopia, December 14, 2006

CADopia - Creating Edge-defined Coons Surfaces - CADopia, December 11, 2006

CADopia - Creating Extruded Surfaces - CADopia, December 11, 2006

CADopia - Creating Ruled Surfaces - CADopia, December 11, 2006

CADopia - Creating Polyface Meshes - creating a polygon mesh consisting of faces connecting three or more vertices, CADopia, December 7, 2006

CADopia - Creating Rectangular Meshes - creating a 3D rectangular mesh consisting of four-sided polygons, CADopia, December 7, 2006

CADopia - Creating Three-Dimensional Faces - CADopia, December 4, 2006

CADopia - Applying Elevation and Thickness - creating three-dimensional entities, CADopia, December 4, 2006

CADopia - Setting the Viewing Direction - viewing a 3D drawing, CADopia, November 30, 2006

CADopia - Drawing in Three Dimensions - creating 3D models of 3D objects, CADopia, November 30, 2006

CADopia - Printing a Drawing - CADopia, November 27, 2006

CADopia - Using Plotter Drivers - CADopia, November 23, 2006

CADopia - Reusing Print Settings - save print settings to a PCP file and assigning a PCP file, CADopia, November 23, 2006

CADopia - Previewing a Drawing Before Printing - CADopia, November 27, 2006

CADopia - Turning Off Print Style Tables - CADopia, November 20, 2006

CADopia - Choosing How Lineweights Print - setting lineweight options, CADopia, November 20, 2006

CADopia - Converting Print Style Tables - converting a color-dependent print style table to a named print style table, CADopia, November 16, 2006

CADopia - Changing a Drawing's Print Style Table Type - changing a drawing to use named or color-dependent print style tables, CADopia, November 16, 2006

CADopia - Copying, Renaming, or Deleting Print Style Tables - CADopia, November 13, 2006

CADopia - Modifying Print Style Tables - CADopia, November 13, 2006

CADopia - Assigning Print Style Tables - CADopia, November 9, 2006

CADopia - Creating New Print Style Tables - CADopia, November 9, 2006

CADopia - Implementing Print Style Tables - using and customizing print style tables, CADopia, November 6, 2006

CADopia - Understanding Print Style Tables - comparing print style table types, CADopia, November 6, 2006

CADopia - Specifying the Print Area Origin - CADopia, November 2, 2006

CADopia - Specifying a Portion of the Drawing to Print - CADopia, November 2, 2006

CADopia - Specifying the Scale Factor Yourself - CADopia, October 30, 2006

CADopia - Scaling the Drawing Automatically for Printing - CADopia, October 30, 2006

CADopia - Selecting a Printer or Plotter - CADopia, October 26, 2006

CADopia - Setting the Paper Size and Orientation - printing a drawing upside down, CADopia, October 26, 2006

CADopia - Modifying Layout Viewports - after creating layout viewports, modify them following the steps, CADopia, October 23, 2006

CADopia - Viewing and Scaling Layout Viewports - change how to view items within a layout viewport by specifying a scale factor, CADopia, October 23, 2006

CADopia - Creating Layout Viewports - CADopia, October 19, 2006

CADopia - Managing Layouts in a Drawing - renaming or deleting a layout, reordering the Layout tabs, and viewing a list of all layouts, CADopia, October 19, 2006

CADopia - Reusing Layouts from Other Files - making a copy of a layout and saving a layout as a drawing template, CADopia, October 16, 2006

CADopia - Creating a New Layout - using either the Layout1 or Layout2 tab, a new Layout tab or an existing file to create a new layout, CADopia, October 16, 2006

CADopia - Displaying the Model and Layout tabs - turning the model and layout tabs display on or off, CADopia, October 12, 2006

CADopia - Viewing Drawings in Paper Space and Model Space - CADopia, October 12, 2006

CADopia - Getting Started Printing - CADopia, October 5, 2006

CADopia - Deleting Clipping Boundaries - CADopia, October 5, 2006

CADopia - Understanding Paper Space and Model Space - CADopia, October 9, 2006

CADopia - Understanding Layouts - preparing the drawing for printing multiple layouts, CADopia, October 9, 2006

CADopia - Turning Clipping Boundaries On and Off - CADopia, October 2, 2006

CADopia - Adding Clipping Boundaries - define a rectangular clipping boundary and a clipping boundary using a polyline, CADopia, October 2, 2006

CADopia - Binding External References to Drawings - CADopia, September 28, 2006

CADopia - Changing the Path for External References - CADopia, September 28, 2006

CADopia - Reloading External References - CADopia, September 25, 2006

CADopia - Removing External References - unloading and detaching an external reference, CADopia, September 25, 2006

CADopia - Opening External References - using Xref Manager to open the source drawing for any external reference, CADopia, September 21, 2006

CADopia - Viewing the List of External References - viewing external references as list view or tree view using Xref Manager, CADopia, September 21, 2006

CADopia - Extracting Attribute Information - CADopia, September 18, 2006

CADopia - Attaching External References - CADopia, September 18, 2006

CADopia - Editing Attributes Attached to Blocks - CADopia, September 14, 2006

CADopia - Editing Attribute Definitions - CADopia, September 14, 2006

CADopia - Defining Attributes - specifying the characteristics of the attribute, CADopia, September 11, 2006

CADopia - Exploding Blocks - CADopia, September 11, 2006

CADopia - Redefining Blocks - redefining a block in the current drawing, CADopia, September 7, 2006

CADopia - Inserting Blocks - inserting blocks and an entire drawing into the current drawing, CADopia, September 7, 2006

CADopia - Creating Blocks - creating a block for use within a current drawing and saving the block as a separate file, CADopia, September 4, 2006

CADopia - Working with Blocks - characteristics of blocks, CADopia, September 4, 2006

CADopia - Controlling Alternate Dimension Units - creating an alternate dimension, CADopia, August 31, 2006

CADopia - Controlling Dimension Tolerance - creating a tolerance dimension, CADopia, August 31, 2006

CADopia - Controlling Dimension Text - aligning dimension text with the dimension line, CADopia, August 28, 2006

CADopia - Controlling Dimension Units - rounding off the dimensions, CADopia, August 28, 2006

CADopia - Controlling Line Settings - setting the color for dimension lines, CADopia, August 24, 2006

CADopia - Controlling Dimension Format - controlling the placement of dimension text and arrowheads, CADopia, August 24, 2006

CADopia - Controlling Dimension Arrows - choosing an arrowhead with appropriate size and appearance, CADopia, August 21, 2006

CADopia - Making Dimensions Oblique - making oblique extension lines, CADopia, August 21, 2006

CADopia - Creating Leaders and Annotations - CADopia, August 17, 2006

CADopia - Creating Ordinate Dimensions - CADopia, August 17, 2006

CADopia - Creating Diametral and Radial Dimensions - CADopia, August 14, 2006

CADopia - Creating Linear Dimensions - dimensioning an angle encompassed by an arc, CADopia, August 14, 2006

CADopia - Understanding Dimensioning Concepts - 5 basic types of dimensions and their characteristics, CADopia, August 10, 2006

CADopia - Using an Alternate Text Editor - selecting an alternate text editor and creating paragraphs, CADopia, August 10, 2006

CADopia - Changing Paragraph Text - editing paragraph text and changing its text properties, CADopia, August 7, 2006

CADopia - Changing Line Text - editing text and changing text properties, CADopia, August 7, 2006

CADopia - Including Special Text Characters - using control codes to include special characters, CADopia, August 3, 2006

CADopia - Setting the Line Text Alignment - aligning the text at left, center, right, at the top, middle, or baseline of the text, CADopia, August 3, 2006

CADopia - Setting the Paragraph Text Style - typing the name of a previously defined style to specify a paragraph text style, CADopia, July 31, 2006

CADopia - Setting the Line Text Style - CADopia, July 31, 2006

CADopia - Working with Text Styles - understanding the style characteristics and creating a text style, CADopia, July 27, 2006

CADopia - Creating Paragraph Text - determining the paragraph's boundary width and then creating paragraph text, CADopia, July 27, 2006

CADopia - Creating Line Text - specify insertion point, height and text rotation angle and then type text, CADopia, July 24, 2006

CADopia - To Fillet Two Entities - specify the fillet radius for two entities, CADopia, July 24, 2006

CADopia - To Fillet Selected Vertices in a Polyline - filleting circles, arcs, parallel lines, rays, and infinite lines, CADopia, July 20, 2006

CADopia - To Fillet an Entire Polyline - CADopia, July 20, 2006

CADopia - To Chamfer Two Entities Using the Distance-Distance Method - specifying the first and second chamfer distances between two entities, CADopia, July 17, 2006

CADopia - To Chamfer Two Entities Using the Distance-Angle Method - specifying the chamfer distance and angle between two entities, CADopia, July 17, 2006

CADopia - To Chamfer Selected Vertices in a Polyline - first select the polylines along the segments to begin and end chamfering, CADopia, July 13, 2006

CADopia - To Chamfer All Vertices in a Polyline - CADopia, July 13, 2006

CADopia - Exploding Entities - CADopia, July 10, 2006

CADopia - Editing Polyline Vertices - move a polyline vertex and tapering the width of an individual polyline segment, CADopia, July 10, 2006

CADopia - Changing the Polyline Width - applying a uniform width to the entire entity or tapering the polyline uniformly along its entire length, CADopia, July 6, 2006

CADopia - Joining Polylines - joining an arc, line, or polyline to an existing polyline, CADopia, July 6, 2006

CADopia - Curving and Decurving Polylines - fitting a curve to a polyline, CADopia, July 3, 2006

CADopia - Opening and Closing Polylines - closing an open polyline, CADopia, July 3, 2006

CADopia - Editing Polylines - converting an entity into a polyline and then modifying, CADopia, June 29, 2006

CADopia - Ungrouping Entities - deleting the group from the drawing while entities remain in the drawing, CADopia, June 29, 2006

CADopia - Changing the Order of Entities in a Group - CADopia, June 26, 2006

CADopia - Modifying a Group and its Entities - renaming, changing description and making a group selectable in the drawing, CADopia, June 26, 2006

CADopia - Creating a Group - entering a group name and description, then selecting the entities for the group, CADopia, June 22, 2006

CADopia - Joining Entities - joining two parallel lines or arcs sharing the same center point and radius, CADopia, June 22, 2006

CADopia - Breaking Entities - specifying two break points to break an entity, CADopia, June 19, 2006

CADopia - Editing the Length of Entities - changing the length of an entity by dragging, CADopia, June 19, 2006

CADopia - To Trim Several Entities Using the Fence Selection Method - selecting boundary edge and specifying two points to trim entities, CADopia, June 15, 2006

CADopia - To Trim an Entity to an Implied Boundary - CADopia, June 15, 2006

CADopia - To Trim an Entity - select the cutting edge to trim an entity, CADopia, June 12, 2006

CADopia - To Extend Several Entities Using the Fence Selection Method - selecting the boundary edge and then specifying the points of the fence, CADopia, June 12, 2006

CADopia - To Extend an Entity - CADopia, June 8, 2006

CADopia - To Extend an Entity to an Implied Boundary - using edge mode and extend tools to extend the entity to a boundary edge, CADopia, June 8, 2006

CADopia - Stretching Entities - stretching an entity using grips, CADopia, June 5, 2006

CADopia - Scaling Entities - scaling a selection set by a scale factor and an entity using grips, CADopia, June 5, 2006

CADopia - Rotating Entities - rotating about a point at an angle or in reference to a base angle, CADopia, June 1, 2006

CADopia - Reordering Entities - order of entities using Draw Order tool, CADopia, June 1, 2006

CADopia - Moving Entities - moving a selection set or an entity using grips, CADopia, May 29, 2006

CADopia - Arraying Entities - creating polar and rectangular arrays, CADopia, May 29, 2006

CADopia - Mirroring Entities - specifying two points around a mirror line to mirror entities, CADopia, May 25, 2006

CADopia - Making Parallel Copies - making a parallel copy by specifying the distance or passing through a point, CADopia, May 25, 2006

CADopia - Copying Between Drawings - cutting and copying entities to the Clipboard, CADopia, May 22, 2006

CADopia - Copying Entities Within a Drawing - copying a selection set and making multiple copies of it, CADopia, May 22, 2006

CADopia - Modifying the Properties of Entities - changing properties like layer, thickness, linetype, color of entities depending upon their type, CADopia, May 18, 2006

CADopia - Deleting Entities - deleting a selection set of entities from a drawing, CADopia, May 18, 2006

CADopia - Selecting Entities First - locating grips while selecting an entity and then modifying it, CADopia, May 15, 2006

CADopia - Turning Grips On and Off - changing grip settings and using it for editing, CADopia, May 15, 2006

CADopia - To Create a Crossing Window - creating a Window-Inside, CADopia, May 11, 2006

CADopia - To Select Entities Using Fence - specifying the endpoints of the fence segments or vertices of the polygon, CADopia, May 11, 2006

CADopia - Entity-Selection Methods - choosing entities from a prompt box, CADopia, May 8, 2006

CADopia - Displaying Selected Entities Highlighted - turning the highlighting feature on or off, CADopia, May 8, 2006

CADopia - Tracking Time Spent Working on a Drawing - displaying the timer information, CADopia, May 4, 2006

CADopia - Displaying the Drawing Status - information is displayed about drawing's name, its limits, insertion base, grid spacing, more, CADopia, May 4, 2006

CADopia - Calculating Distances and Angles - information includes entity type, layer, color, linetype, more, CADopia, May 1, 2006

CADopia - Displaying Information About Entities - calculating the distance between two points and their angle, CADopia, May 1, 2006

CADopia - Calculating Areas of Closed Entities - calculating area and circumference (or perimeter) of the entity, CADopia, April 27, 2006

CADopia - Calculating Combined Areas - adding or subtracting areas while calculating a combined area, CADopia, April 27, 2006

CADopia - Dividing Entities into Segments - dividing an entity into segments and marking them using point entities or blocks, CADopia, April 24, 2006

CADopia - Calculating Areas - calculating areas defined by a series of points, CADopia, April 24, 2006

CADopia - Measuring Intervals on Entities - using either a point entity or a block to measure interval along an entity, CADopia, April 20, 2006

CADopia - Specifying Measurements and Divisions - measure or divide arcs, circles, lines, polylines, ellipses, and splines, CADopia, April 20, 2006

CADopia - To Change a Dimension Style Name in the Current Drawing - using Dimension Settings tool to rename the dimension style, CADopia, April 17, 2006

CADopia - To Copy a Dimension Style From One Drawing to Another - using Explore Dimension Settings tool to copy a dimension style, CADopia, April 17, 2006

CADopia - Working with Dimension Styles - displaying the CADopia Explorer Dimension Styles element, CADopia, April 13, 2006

CADopia - To Create a Dimension Style - set dimension using dimension settings dialog box, CADopia, April 13, 2006

CADopia - To Display Blocks in the CADopia Explorer - explore the blocks with the image of each block, CADopia, April 10, 2006

CADopia - Saving a Block as a Separate Drawing - CADopia, April 10, 2006

CADopia - Attaching a Drawing as an External Reference - attaching and editing the path of an external reference, CADopia, April 6, 2006

CADopia - Inserting a Drawing as a Block - CADopia, April 6, 2006

CADopia - Inserting a Block - inserting a block from Block Name list in the CADopia Explorer, CADopia, April 3, 2006

CADopia - Creating and Naming Blocks - creating and changing a block name in the current drawing, CADopia, April 3, 2006

CADopia - Changing Named View Properties - changing the view properties, CADopia, March 30, 2006

CADopia - Restoring Named Views - restoring a named view using the View command or from the CADopia Explorer, CADopia, March 30, 2006

CADopia - To Change a Saved View Name in the Current Drawing - saving the current view or a portion of it as a named view, CADopia, March 27, 2006

CADopia - Using Named Views - save multiple views of the drawing as named views and display using CADopia Explorer, CADopia, March 27, 2006

CADopia - Setting the Current User Coordinate System - setting the current UCS from the CADopia Explorer, CADopia, March 23, 2006

CADopia - Defining and Naming User Coordinate Systems - defining and changing a user coordinate system in the current drawing, CADopia, March 23, 2006

CADopia - Working with Coordinate Systems - displaying the coordinate systems element using CADopia Explorer, CADopia, March 20, 2006

CADopia - Setting the Current Text Style - make a different text style current, CADopia, March 20, 2006

CADopia - Creating and Naming Text Styles - create multiple text styles based on the same font, changing the various characteristics, CADopia, March 16, 2006

CADopia - Modifying Text Styles - modify text style using any of the three methods, CADopia, March 16, 2006

CADopia - Creating a New Complex Linetype - creating complex linetype using any of the three methods, CADopia, March 13, 2006

CADopia - To Create a New Simple Linetype - creating simple linetype using any of the three methods, CADopia, March 13, 2006

CADopia - To Change a Linetype Definition - renaming linetype and changing its definition, CADopia, March 9, 2006

CADopia - Loading Additional Linetypes - loading a new linetype from a linetype library, CADopia, March 9, 2006

CADopia - Working with Linetypes - display the CADopia Explorer Linetypes element, CADopia, March 6, 2006

CADopia - Setting a Layer's Print Style - alter the print style of one or more layers using print style tables, CADopia, March 2, 2006

CADopia - Setting a Layer's Lineweight - using CADopia Explorer to set the lineweight of a layer to determine the thickness of entities, CADopia, March 2, 2006

CADopia - Setting a Layer's Linetype - changing the linetype assigned to one or more layers, CADopia, February 27, 2006

CADopia - Setting the Layer Color - changing the layer's color to change color of all entities automatically, CADopia, February 27, 2006

CADopia - Locking and Unlocking Layers - unlocking a layer using Explore Layers tool to fully edit the layer, CADopia, February 23, 2006

CADopia - Controlling Layer Printing - printing specific information of your drawing by controlling layer printing, CADopia, February 23, 2006

CADopia - Making a Layer Current - choosing the current layer to set by existing entity type, CADopia, February 20, 2006